Screw Barrels for Yizhumi Injection Molding Machine

Screw Barrels for Yizhumi Injection Molding Machine

Diameter: φ15-φ500

L/D ratio:15-55

Technical Parameter:

Hardness After Hardening & Tempering:HB280-320

Nitrided hardness: 950-1100HV

Nitrided layer depth:0.50-0.80mm

Nitrided brittleness: Less than 2 level

Surface roughness: Ra 0.4μm

Linearity of screw: 0.015mm/m

Bimetallic layer depth: ≥3mm

Bimetallic hardness: HRC60-72

Hard-chrome plating hardness after nitriding: ≥950HV

Chrome-plating layer depth: 0.025~0.10mm

Product classification:

According to different ingredents and products the screw can be chosen: general type, pin type, barrier type, separation type, and gas-exhausting/vented type, etc.

Leave a Reply

Your email address will not be published. Required fields are marked *